Escape to the outdoors

Never leave your trusted companion behind

no regrets

The 1070 & 1082 gun racks are designed to accept various firearms. Our racks can quickly be adjusted to hold sporting weapons like the AR-15, shotguns, conventional stock rifles, or even handguns. The 4130 secures pump-action shotguns like the Remington 870, Mossberg 500/590, or Winchester 1200/1300. Our racks can be installed in buildings, ATVs/UTVs, Jeeps, trucks, boats, or anywhere else with a suitable mounting location.

priortize & accessorize

Blac-Rac is a paradigm shift in gun rack technology. Designed from the ground up to secure AR-type weapons, the 1082 and 1070 utilize two opposing side plates that secure the gun while protecting the take-down pins, magazine release, and trigger from tampering. The unique design does not interfere with the top rail and hand guards, so removing any installed accessories like an optic, a laser, or a flashlight is unnecessary. In addition, the single-point mounting system provides enough clearance for weapons with up to a 30-round magazine to be installed.  

The 1082 and 1070 can also secure various other firearms like conventional stock rifles, shotguns, handguns, and dozens of other widely used tactical weapons. 

dual 1070 gun racks mounted in rzr utv holding ar15

VERSATILE MOUNTING OPTIONS

Our gun racks were designed to be easy to install and are durable enough to go almost anywhere.  We offer a variety of Mounting Accessories that allow our racks to be installed on virtually any suitable surface in a vehicle or building.  Our Tube Mounts fit most UTV/ATV roll cages or similar applications.  We also have a specific mount for the rear overhead bar in the Jeep JK.

dual 1070 gun racks mounted overhead in can-am maverick

EXPLORE OUR GUN RACKS

FOR INFORMATION ABOUT PRODUCTS FOR LAW ENFORCEMENT OR MILITARY APPLICATIONS, CONTACT BLAC-RAC CUSTOMER SERVICE.

Model 1082

The multi-Weapon gun rack accommodates pistol grip weapons such as the AR15/M4. In addition, the 1082 can be used used to secure conventional stock weapons like bolt-action rifles or shotguns with the included stock adapter kit. 

  • Accessory capable – no need to remove the magazine, optic, lights, etc.
  • Stainless steel construction is highly resistant to corrosion
  • Covers AR/M4 take down pins
  • Adjusts to fit most weapons in the field by adjusting width or length of pull
  • Secures weapon tightly to eliminate vibrations
  • Single point mounting installation
  • Vertical handle operation for applications with less space

AR Retention Post

  • Increases security of the gun rack and drastically lessens the probability of accidental discharge 
  • Recommended for use with AR/M4 type weapons

Charger Stop

  • Prevents the charging of your AR/M4 weapon with a simple bolt-on attachment

Model 1070

The multi-Weapon gun rack accommodates pistol grip weapons such as the AR15/M4 but can be fitted with the included stock adapter for conventional stock weapons.   

  • Accessory capable – no need to remove the magazine, optic, lights, etc.
  • Powder coated steel construction is highly resistant to corrosion
  • Covers AR/M4 takedown pins 
  • Secures weapon tightly to eliminate vibrations
  • Adjusts to fit most weapons in the field by  adjusting width or length of pull
  • Single point mounting installation
  • Horizontal handle operation for applications with more space

AR Retention Post

  • Increases security of the gun rack and drastically lessens probability of accidental discharge  

Charger Stop

  • Prevents charging of your AR/M4 weapon with a simple bolt-on attachment

Model 4130

Pump-action shotgun gun rack designed for weapons like the Remington 870, Mossberg 500/590, and the Winchester 1200/1300.   

  • Machined from aluminum billet for superior strength
  • Secures weapon tightly to reduce vibrations
  • Retro-Fit capable using industry standard mounting locations
  • Side saddle and optics friendly

wall/or flat surface mounting

A T-Channel can be attached to any suitable flat surface allowing for concealment inside homes, trunks of vehicles, etc. The 1070 or 1082 can be installed vertically or horizontally on the T-Channel. The T-Channel also allows for height adjustment when installed vertically. 

splash

The Stud Mount Bracket positions the 1070 or 4130 parallel to the mounting surface. This allows for installation behind a door or inside a closet. The Stud Mount Bracket can be used with or without a T-Channel. 

Roll BArs

Tube-Mounts are used for installations on roll bars, railings, or grab handles. Typical applications are for mounting in UTVs, Jeeps, and boats. 

splash

Our JK Mount is installed on the rear overhead bar of the Jeep JK.   No drilling or tapping is required. Unfortunately, the JK mount is not compatible with the factory-installed overhead speakers.

WHEN IT'S NOT IN YOUR HANDS, IT'S IN OURS™

Safety

To fully maximize the security features of the Blac-Rac system, we strongly recommend the installation of a metal, non-folding, non-drop down, semi-permanent trigger guard in AR-type weapons. The Blac-Rac Alta Trigger Guard is an ideal solution, providing maximum security for your gun. This recommendation is unnecessary if your Blac-Rac is equipped with the AR Retention Post. Always practice safe weapons handling and never place a loaded weapon in the Blac-Rac.  

The user is responsible for determining a suitable installation location that can support the weight of the Blac-Rac and the weapon.