WE HAVE YOUR SIX

Don’t leave anything to chance, choose a proven solution preferred by professionals

  Video shows a law enforcement agency test of the 1082 equipped with the *AR Retention Post 

*Patent Pending

Built for Patrol

 

Blac-Rac is a paradigm shift in gun rack technology. Designed from the ground up to secure AR-type weapons, the 1082 utilizes two opposing side plates that secure the rifle while protecting the take-down pins, magazine release, and trigger from tampering.  The unique design does not interfere with the top rail and hand guards, so there is no need to remove any installed accessories like an optic, a laser, or a flashlight.  The single-point mounting system provides enough clearance for weapons with up to a 30-round magazine to be installed.  

The 1082 can also be used to secure various other firearms like conventional stock rifles, shotguns, handguns, and dozens of other widely used tactical weapons.

1082 installed in a Ford Expidition
1082 side mounted on a prisoner partition

strength & durability

The 1082 is manufactured from cast 304 stainless steel to achieve superb strength and corrosion resistance. Our parts are machined to tight tolerances to ensure years of worry-free service and reliable operation.

1082 Police BMW Motorcycle
1082 installed in a BMW saddlebag

modern ELECTRONICS

Blac-Rac designs gun racks to be smarter. Our electronics are designed to provide the highest level of security and reliability while keeping the installation process simple. Our available Cold-Wire ® Technology prevents the lock from being opened if the lock’s power wires are cut and an external power source is applied to the wires. 

1082 1088 40mm less lethal launcher
1088 and 1082 installed on a prisoner partition

FOR MORE INFORMATION ABOUT PRODUCTS FOR LAW ENFORCEMENT AND MILITARY USE OR TO PLACE AN ORDER, CONTACT BLAC-RAC CUSTOMER SERVICE.

gun rack models

Model 1082

The multi-weapon gun rack accommodates pistol grip weapons like the AR15/M4 as well as conventional stock weapons by using an available stock adapter.   For patrol use with Mil-Spec AR/M4’s, the 1082 equipped with the AR Retention Post is recommended. 

Available with or without electronic release.  Each unit is shipped with two proprietary keys.

  • Accessory capable – no need to remove the magazine, optic, lights, etc.
  • Stainless steel construction is highly resistant to corrosion
  • Covers AR/M4 takedown pins 
  • Built-In electronic timer delay
  • Adaptable to most weapons in the field by adjusting width or length of pull
  • Secures weapon tightly to lessen vibrations
  • Single point mounting installation
  • Vertical handle operation for applications with less space

Note:  For 1082’s that are not equipped with the AR Retention post,  the use of the Blac-Rac Alta Trigger Guard is recommended for optimal security. The trigger guard must be installed with both roll pins on M4 style lowers.  Click here and refer to section 10 for further details.

Cold-Wire® Technology

  • Prevents the opening of the gun rack if the power wires are cut and an external power source is applied to the power wires.

AR Retention Post

  • Increases security  and lessens the probability of accidental discharge  

Charger Stop

  • Prevents charging of  AR/M4 weapon with a simple bolt-on attachment

Model 1070

Mechanical multi-weapon gun rack accommodates pistol grip weapons like the AR15/M4 as well as conventional stock weapons by using an available adapter.  

Available with an installed lock or with a 3/8 padlock for a user provided lock. 


  • Accessory capable – no need to remove the magazine, optic, lights, etc.
  • Powder-coated steel construction is highly resistant to corrosion
  • Covers  AR/M4 takedown pins 
  • Secures weapon tightly to lessen vibrations
  • Adaptable to most weapons in the field by adjusting width or length of pull
  • Single point mounting installation

Charger Stop

  • Prevents charging of your AR/M4 weapon with a simple bolt-on attachmen

Model 4130

Pump-action shotgun gun rack designed for weapons like the Remington 870, Mossberg 500/590 and the Winchester 1200/1300.  

Available with or without electronic release.  Each unit is shipped with two proprietary keys.

 

  • Machined from aluminum billet for superior strength
  • Built-In electronic timer delay
  • Secures weapon tightly to reduce vibrations
  • Retro-Fit capable using industry standard mounting locations
  • Side saddle and optics friendly

Cold-Wire® Technology

  • Prevents the opening of the gun rack if the power wires are cut and an external power source is applied to the power wires.

Model 1088

Single-shot, break front, less-lethal launcher rack designed specifically for 37/40mm launchers like the LMT or similar models. 

Contact Blac-Rac Customer Service   to confirm if the 1088 is compatible with your launcher. 

Available with or without electronic release. Each unit is shipped with two proprietary keys. 

 

  • Accessory capable – no need to remove optic, lights, etc.
  • Stainless steel and aluminum construction is highly resistant to corrosion
  • Covers takedown pins
  • Built-In electronic timer delay
  • Secures weapon tightly to lessen vibrations
  • Single point mounting installation
  • Vertical handle operation for applications with less space

Cold-Wire® Technology

  • Prevents the opening of the gun rack if the power wires are cut and an external power source is applied to the power wires.

elevate your existing blac-rac

WHEN IT'S NOT IN YOUR HANDS, IT'S IN OURS™

AVAILABLE mOUNTING OPTIONS

Partition Mounting

 Our 18″ or 10″ T-Channel can bolt directly to a partition allowing up to two Blac-Rac gun racks to be installed.  Our T-Channel’s allow for vertical adjustment so you can get the perfect fit for your vehicle.  

CAUTION: The user is responsible for determining a suitable  installation location that can support the weight of the rack and weapon.

Stand Alone Mount

Our stand alone or freestand mounts  can be used for a variety of applications.  It allows the user to install up to two Blac-Rac’s side by side with a relatively small footprint.  A suitable flat surface or specialized vehicle mounts are required for proper installation. 

splash

We offer a 19″ tall stand, which sits at a 15 degree angle and a 22″ tall stand, which sits at 5 degree angle.  Installation requires the use of a baseplate and installation hardware. Contact customer service for more information.

Overhead Mounting

We offer a variety of brackets and tube mount sizes for installation to prisoner partitions, roll bars, grab handles or railings.    

Open frame vehicles generally fall in this category. If you have any applications which require mounting to a round tube, check out our Tube Mounts.  We offer a large range and can produce custom sizes at an additional cost.

Safety

In order to fully maximize the security features of the Blac-Rac system, we strongly recommend the installation of a metal, non-folding, non-drop down, semi-permanent trigger guard in AR type weapons. The Blac-Rac Alta Trigger Guard is an ideal solution, providing maximum security for your weapon.  If your Blac-Rac is equipped with the AR Retention Post, this recommendation is not necessary.  Always be sure to practice safe weapons handling and never place a loaded weapon in the Blac-Rac.  

The user is responsible for determining a suitable installation location that can support the weight of the Blac-Rac and weapon.